Calgary Truck Scale Systems – From 20' to 100'

Various designs are available to suit the specific needs of the customer. Our scale systems are manufactured in Western Canada, and the quality of design and workmanship is unmatched in the industry. Our designs are Consumer and Corporate Affairs, Weights & Measures approved. We offer Calgary truck scales they can depend on. To request a quote on our truck scale systems, contact us today.


Portable Truck Scale Design

Flat Top Truck Scale Design

Side Rail Truck Scale Design

Axle Scale Design

Western Truck/Rail Scale

Massload Axle Pad Scale

Massload Standard Wheel Pad Scale

Rice Lake Rail Scale

Loadmaster Portable Axle Scale

Portable Truck Scale Design

Calgary truck scales

Click here to request a quote. 

Features of this design include:

  • Fully electronic
  • Low maintenance
  • Checker plate steel deck
  • Various sizes
  • Custom manufacturing
  • Minimal foundation costs
  • Self-contained modules for easy set-up and transportation

Flat Top Truck Scale Design

Flat Top Truck Scale Design

Click here to request a quote. 

Features of this design include:

  • Fully electronic
  • Low maintenance
  • Concrete or steel deck
  • Various sizes
  • Custom manufacturing
  • Load cell access through deck cover plates or side mounts

Side Rail Truck Scale Design

Click here to request a quote. 

Features of this design include:

  • Fully electronic
  • Low maintenance
  • Concrete or steel deck
  • Various sizes
  • Custom manufacturing
  • Side rails to keep truck on the scale

Axle Scale Design

Click here to request a quote. 

Features of this design include:

  • Fully electronic
  • Low maintenance
  • Checker plate steel deck
  • Various sizes
  • Custom manufacturing
  • Minimal foundation costs
  • Easy set-up and transportation

Western Truck/Rail Scale

Western Truck/Rail Scale

Click here to request a quote. 

Combination truck and rail scales provide one scale capable of weighing both types of vehicles. A section of rail is used to weigh rail cars, and an integral concrete deck forms the weighbridge for weighing trucks.

Western vehicle/rail scales can be used to weigh both trucks and railroad cars. They are ideal for grain elevators and other operations where both types of vehicles are weighed. Reduces costs because one scale can handle all weighing needs. Weighbridge converts a section of railroad track into a scale. Trucks are weighed on an integral concrete deck.


Features of these scales include:

  • 60,000-lb dual tandem axle continuous duty
  • Custom scales for all rail sizes and gauges
  • Pandrol e-clip rail fastening system option
  • Manholes provided for pit access
  • Durable stainless steel junction box stands
  • Steel blasted to SSPC-SP6
  • Maximum Capacity: 340,000.0 lb.
  • Readability: 50 lb.

Massload Axle Pad Scale

Massload Axle Pad Scale

Click here to request a quote. 

These weight pads have a very large weighing surface and low profile making them our easiest method of determining truck axle weight. These weight pads are typically sold in pairs but can also be sold in multiples to get complete trailer or truck weight in one weighment. Truck axle scales can be used with ramps for above ground installations or flush with concrete for a pit-installed permanent application. Above ground installations are forklift portable and should be used with quick disconnect cable (see options).


Features include:

  • 84" x 30" axle pads for dual axle truck weight; 30,000 lbs per pad (60,000 lb per axle grouping)
  • 144" x 30" axle pads for tri-axle truck weight; 40,000 lbs per pad (80,000 lb per axle grouping)
  • 6" low profile for ease of use
  • Wheel load accurate to within 0.25% FS
  • Calibrated with fully traceable certified weights
  • Axle scales can be used on cement, pavement or gravel surfaces
  • Forklift portable for use in multiple locations
  • Four year warranty on axle pad frame
  • Two year warranty on truck scale load cells
  • Check weight to avoid overweight fines
  • 150% full scale safe overload (electronics protected); 300% full scale ultimate overload (metal protected)

Massload Standard Wheel Pad Scale

Massload Standard Wheel Pad Scale

Click here to request a quote. 

These wheel load weight pads provide a convenient, portable, and a versatile method of determining truck weight. Weigh pads are frequently used in pairs to weigh one truck axle at a time but can also be used as multiple pads for multi-axle weighing. The platform allows for dual tires easily and safely - the second tire will not be completely on the pad but it will be off the ground to ensure axle weight accuracy. Non skid pattern ensure maximum grip in wet or snowy conditions. These truck scales are often used to check weight and avoid overweight fines.


Features include:

  • Portable wheel load scale
  • Hand portable and light weight truck scale
  • 10,000 lb. x 10 lb. and 20,000 lb. x 20 lb. capacities
  • 20” x 20” x 2 7/8” (pad, handle, ramps); 12” x 12” weighing footprint
  • Wheel load accurate to within 0.25% FS
  • 150% full scale safe overload (electronics protected); 300% full scale ultimate overload (metal protected)
  • Frequently used for check weight and to avoid overweight fines
  • Axle scales can be used on cement, pavement or gravel surfaces
  • 2 Year warranty on truck scales and load cells

Rice Lake Rail Scale

Rice Lake Rail Scale

Click here to request a quote. 

For weight verification and other non-NTEP needs, the RailBoss rail scale is a cost-effective and easy-to-install method for weighing stationary railroad cars. Powered by Rice Lake's 920i® and RailBoss software, RailBoss can be purchased as an eight-section Full-Draft system, or a simpler four-section Double Draft model.

Many scrap yards, agricultural operations and plants that could not justify the space, installation time and cost of a conventional rail scale can afford to install our RailBoss rail scale. It usually takes less than eight hours to install and is less than one-third the cost.


Due to the wide variety of installation configurations, please consult the factory to discuss application requirements and to receive complete specifications and price quotations.


Standard Features include:

  • 80,000 lb. axle capacity
  • 320,000 lb. full scale capacity
  • 40,000 lb. rail section capacity
  • 115RE or 132RE rail sections
  • 5 ft. 10 in rail sections, pre-drilled for joint bars
Rice Lake Rail Scale

Full draft package includes:                                             

  • (8) 5 ft. 10 in rail sections
  • 30 ft. of connecting cable
  • Pre-drilled joint bars with connection hardware
  • (2) Rice Lake junction boxes with transient protection
  • 30 ft. of homerun cable

DoubleDraft package includes:

  • (4) 5 ft. 10 in rail sections
  • 30 ft. of connecting cable
  • Pre-drilled joint bars with connection hardware
  • Rice Lake junction boxes with transient protection
  • 30 ft. of homerun cable


Optional Features include:

  • Custom rail sizes
  • 920i indicator with RailBoss software for full draft or double draft applications


NOTE: RailBoss will not operate without the 920i indicator and RailBoss software

Loadmaster Portable Axle Scale

Loadmaster Portable Axle Scale

Click here to request a quote. 

The LOADMASTER Low Profile Axle Scale. Available as individual platforms to weigh a single axle at a time -or- in multiple platform configurations to weigh entire trucks at once. Portable system with self-contained weigh modules, installed scale is an ultra-low 6" tall.


Benefits of this scale include:

  • Scale can be installed and operating in just hours.
  • System is easily moved to where you need it most. Maximize fleet efficiency by installing in remote locations where trucks are actually loaded. Consistently load trucks to maximum legal weights while minimizing truck rerouting.
  • Obtain overall truck weights by totalizing individual axle weights with single scale system. Net weights can be automatically calculated by weighing truck both full and empty.
  • Multiple platforms can be electrically combined into a single weight indicator for an ultra low (6”) profile truck scale system capable of weighing full-sized tractor trailer rigs.
  • Make your filling operation more efficient by dropping trailers/containers on a pair of scales to actively monitor product weight while filling. Control systems can be configured to automatically cut off filling when full.


Features of this scale include:

  • Pre-assembled and pre-wired portable axle scale weigh modules
  • 32,000 lb. CLC (Concentrated Load Capacity) exceeds legal limits for highway vehicles
  • Stainless Steel hermetically sealed rocker pin load cells will withstand the harshest of environments
  • Stainless Steel NEMA 4X junction box for long term reliability with low cost of ownership
  • Structural steel understructure with durable diamond deck plate
  • Full external frame suitable for directly accepting stone approach
  • Optionally install at grade level
  • Frame can be supplied with Nelson Studs to permanently embed in concrete pad 420


Standard platform sizes (all with the same low profile of 6”) are:

  • 5’, 6’, 10’, 11’ or 12’ widths
  • 5’, 7’ or 10’ lengths – Qty. (4) load cells
  • 12’, 15’, 17’ or 20’ lengths – Qty. (6) load cells
  • 15 ton, 20 ton or 25 ton capacities
  • Standard resolution of 10 lbs. with optional 5 lbs. resolution available as special order


Accessories include:

  • Sloped steel approach ramps
  • Level approach frames to provide smooth transition between scales
Created by

Legal notice