Load Cells for Blenders, Scale Conversions & Truck Scales
Accurate/Western Scales Co. Ltd. offers a wide variety of load cells for all your needs. You can see a few of our options below, but we also invite you to contact us if you have more questions, or if you would like to request a quote on our load cell options.
Load Cells
Anyload S-Type load cell | Anyload Single Ended Beam Load Cell | Anyload Double Ended Beam Load Cell
Anyload Tension Link | Rice Lake S-Type Load Cell | Rice Lake Single Ended Beam | Rice Lake Double Ended Beam
Revere Transducers Single Ended Beam | Revere Transducers Double Ended Beam | Flintec Compression Load Cell
Mounts
Western Scale Truck Scale Mount | Rice Lake ITCM | Anyload 101NHM1 Weigh Module
EZ Mount 1-Mild Steel | Rice Lake RL1800 Series Mild Steel | Rice Lake RL1900 Series
Rice Lake RL50210 TA 50-500 lb. | Rice Lake RL50210 TA 1000-2500 lb. | Rice Lake Translink Parallel Link
Flintec Paramounts | Anyload 102THM5 Truck Scale Mount | 563YHM2 Tank Weigh Module
Truck Scale Mounts, Weigh Modules & More
Accurate/Western Scale Co. Ltd., a Measurement Canada Accredited company, offers truck scale mounts, weigh modules and more to all our customers. Learn more below, or you can contact us if you have any questions or would like to request a quote.
Western Scale Truck Scale Mount
Click here to request a quote.
The load cell unitized platform mount allows complete flexibility in platform configuration plus the ability to select a variety of platforms for use both as a single scale or independent axle weighing units. All options utilize the latest generation, sealed shear beam load cell with the proven self-aligning double-link mount providing floating motion in all directions, eliminating check rods and the inherent problems of compression or tension load cells for a flexible weigh platform design. All designs are Measurement Canada approved.
Rice Lake ITCM (Available in Stainless Steel)
Click here to request a quote.
The ITCM Series (Isolated Tension Cell Module) utilizes several Rice Lake Weighing Systems components to provide an unmatched level of performance in tank and hopper weighing applications and mechanical scale conversions. The ITCM incorporates clevis and unique rod end ball joint assemblies to reduce the overall length to less than half of the traditional tension cell mounts, while providing correct load alignment. In addition, the load cell is completely electrically isolated from stray currents, which are a major cause of load cell failure. To complete the design, a grounding strap connects the two clevis assemblies to further provide safety to your load cells.
Some of its features include:
- Capacities (per module): 100-20,000 lb. (45.4-9071.1 kg.)
- Clevis mounts with nylon insulating washers
- PTFE lined rod end ball joints
- Load cell is completely isolated from stray currents (excluding 20,000 lb. capacity)
- Grounding strap provides alternative path to ground
- Complete package for ease of installations
- Provides correct load cell loading even in difficult installations
- Lower overall height compared to other isolated tension assemblies
The complete kit includes:
- 1 JB4SS NEMA 4X stainless steel signal-trim junction box
- 3 or 4 ITCM assemblies with RL20000 NTEP-certified S-Beam load cells
- 25' of Hostile Environment EL147HE SURVIVOR® load cell cable
Anyload 101NHM1 Weigh Module
Click here to request a quote.
Suspended hopper and tank; use as a single module or in multiple. Features include:
- Load cell equivalent to OIML R60 C3 (Rated Capacity ≥ 200kg.)
- Alloy steel construction
- Clevis mounts with nylon insulating washers and Teflon ball joints rod ends
- Load cell is completely isolated from stray currents
- Alternative path to ground stray currents by a grounding strap connection
- Capable of releasing bending & torsional force, and providing perfect tension loading
EZ Mount 1-Mild Steel (Available in Stainless Steel)
Click here to request a quote.
The EZ Mount 1 Series weigh modules utilize the double-ended beam design with an articulating top plate to provide superior accuracy in any loading condition. The double-ended beam design means there is less cumbersome hardware and each module has a lower profile than modules of different configurations. NTEP certified and FM approved RL70000 Series load cells give you accuracy and dependability in many applications, including intrinsically safe and explosion proof areas. Ideal for tank or hopper weighing.
Some of its features include:
- Capacities (per module): 5000-250,000 lb. (2268-113,398.1 kg.)
- NTEP-certified load cells
- Unique sliding pin design compensates for thermal expansion/contraction
- Self-checking
- Easy load cell replacement
- Simplified design allows bolting directly to tank and floor
- Center-loaded double-ended shear beam design
- Low-profile design
- Painted mild steel construction
Rice Lake RL1800 Series Mild Steel (Available in Stainless Steel)
Click here to request a quote.
The RL1800 Series Mounting Assembly Kit utilizes several Rice Lake Weighing Systems components to provide an unmatched level of performance in tank and hopper weighing applications. The RL1800 Series kit is ideally suited for indoor and outdoor process control operations with medium-range capacities. Each module combines multi-directional movement and self-checking capabilities. The RL30000W and RL35023S load cells used are NTEP certified in capacities of 1000 lb. to 10,000 lb.
Some of its features include:
- Capacities (per module): 250-10,000 lb. (113.4-4535.9 kg.)
- NTEP-certified cells in 1000-10,000 lb. (453.6-4535.9 kg.) capacities (except 3000 lb. [1360.9 kg.])
- Zinc plated mild steel/stainless steel construction
- Center-pivoted, tension loading design
- Self-checking, multi-directional movement
- Load is suspended on high-strength bolt instead of wire rope
- Design incorporates spherical washers for self-centering
- Stainless steel kit includes RL35023S NTEP-certified load cell
Rice Lake RL1900 Series
Click here to request a quote.
The RL1900 Series Weigh Module Kit utilizes several Rice Lake Weighing Systems components to provide an unmatched level of performance in tank and hopper weighing applications. The RL1900 kit is ideally suited for tank, hopper and bin weighing operations with medium-range capacities. Each module combines multi-directional movement and self-checking capabilities. The welded seal stainless steel RLSSB load cell withstands washdown and corrosive environments that may present problems to other cells.
Some of its features include:
- NTEP-certified load cells, 1:5000d, Class III Single Cell
- Capacities (per module): 1000-10,000 lb. (453.6-4535.9 kg.)
- 304 stainless steel construction
- Center-pivoted, tension loading design
- Welded-seal stainless steel load cells
- Self-checking, multi-directional movement
- Easy load cell movement
- Load is suspended on high-strength bolt instead of wire rope
- Design incorporates spherical washers
Rice Lake RL50210 TA 50-500 lb. (Available in Stainless Steel)
Click here to request a quote.
The RL50210 TA Weigh Module Kit provides a cost effective alternative for your customers' low-range weighing needs. A variety of features makes this kit easy to install and an exceptional choice for various indoor weighing applications where checking requirements are low. Environmentally protected load cells, neoprene isolation/compression mounts and other Rice Lake Weighing Systems components are the keys to this module's outstanding performance.
Some of its features include:
- Zinc plated, mild steel modules
- Lower weighing ranges from 50-500 lb. (22.7-226.8 kg.) per module
- Environmentally protected load cells
- Neoprene isolation/compression mounts allow for minor misalignment, thermal expansion and shock absorption
- Overload stop for 500 lb. (226.8 kg.) modules provides durability
Rice Lake RL50210 TA 1000-2500 lb. (Available in Stainless Steel)
Click here to request a quote.
Some features of this unit include:
- NTEP-certified load cells (alloy steel only), 1:5000d, Class III Multiple Cell
- Zinc plated, mild steel assemblies
- Medium weighing ranges from 1000-2500 lb. (453.6-1134.0 kg.) per module
- Environmentally protected load cells
- Neoprene isolation/compression mounts allows for minor misalignment, thermal expansion and shock absorption
- Overload stop provides durability
- RL50210 stainless steel mounts use RL35023S stainless steel load cells, capacities: 1000-2500 lb. (453.6-1134.0 kg.) NTEP cells
Features of the complete kit include:
- 1 JB4SS NEMA 4X stainless steel signal-trim junction box
- 3 or 4 RL35023 shear beam load cells
- Stainless steel kits include RL305023S load cell
- 3 or 4 neoprene isolation/compression mounts
- 25' of Hostile Environment EL147HE SURVIVOR® load cell cable
Click here to request a quote.
The TRANSLINK parallel link truck scale assembly is designed for use with Rice Lake Weighing Systems RL75223 and RL75040A, Revere Transducer’s 5223 or Vishay Sensortronics’ 65040A load cells. This design allows the scale platform to move freely in all directions in a horizontal plane while causing the platform to selfcenter because of the pendulous action of the links. The unique parallel link design eliminates the need for costly and troublesome checkrods. Simply install platform bumpers and forget about over-travel. This mount is ideal for heavy-capacity weigh bridges.
Some of its features include:
- Capacities: 25,000-100,000 lb. (11,339.8-45,359.4 kg.)
- Center-supported, end-loaded double-ended shear beam design
- Free movement in all directions in the horizontal plane with virtually no friction
- Links provide optimal loading conditions for the cell
- Completely self-centering
- Requires no check rods
- Utilizes cells with 3 mV/V output
- Models available for RLWS RL75223 and RL75040, RTI 5223 and Vishay Sensortronics 65040A load cells
Flintec Paramounts (Available in Stainless Steel)
Click here to request a quote.
The Paramounts EP (Environmentally-Protected Load Cells) system offers all the design advantages of the Paramounts system in applications where the extensive sealing of the SB4 load cell is not necessary. Paramounts EP provides a low-cost alternative for the superior mechanical loading system found in the standard Paramounts. Economy and performance are in one complete weighing system.
Some of its features include:
- Capacities (per module): 1125-22,500 lb. (1 kN-102.1 kg..-100 kN/10,205.9)
- NTEP-certified load cells
- Unique design allows for thermal expansion/contraction
- Jacking screw allows empty vessel to be lifted clear of load cell for maintenance
- Unique blind load cell hole eliminates unwanted side and eccentric loads
- Vessel is free to slide laterally on PTFE coated surfaces
- Load cell outputs are matched to ±.07% allowing replacement without further calibration
The complete kit includes:
- 1 JB4SS NEMA 4X stainless steel excitation trim junction box
- 1 fixed-pin module, 1 side-stop module, and 1 free-sliding assembly
- Flintec SB5 NTEP-certified 1:5000d, Class III, stainless steel environmentally-protected load cell
- 25' of our hostile environment EL147HE SURVIVOR® load cell cable
Click here to request a quote.
Some of this option’s features include:
- Equipped with Center-loaded double-ended shear beam for industry applications
- Center-pivoted, tension loading design, self-checking, free movement in all directions with little friction, complete self-centering without check rods
- Easy to install without removal of the weighbridge, maintenance-free
- Unique high-performance "Unilink" suspension system, high stable installation and high accuracy
- 102TSM5 Stainless steel available
563YHM2 Tank Weigh Module
Click here to request a quote.
Some of this option’s features include:
- Load cell up to OIML R60 C3 and NTEP 1:5 000 Class lll, Multiple cell
- Nickle plated mild steel/stainless steel construction available
- Center-pivoted, tension loading design, self-checking,multi-directional movement
